Product Preparation & Application
Material Preparation: Catalyze Gem Prime White Conversion Primer with pre-packaged catalyst kit. Mix or agitate thoroughly before use. Reduction may be required for certain types of application. SOL-9011 HAPs Free Thinner should be used for reduction. If a slower dry time is desired, use only SOL-9012 HAPs Free Retarder at levels not to exceed 4% by volume.
Application: Gem Prime White Conversion Primer is designed for spray application. Temperature will affect viscosity. All products are designed to achieve the highest possible solids content at a viscosity low enough to allow proper spray atomization without the addition of costly chemical solvents. We recommend a coating system comprised of 1 coat of primer at 3-4 mils wet film build and 1-2 coats of topcoat at 3-4 mils wet film build per coat. The total dry film build for the complete coating system should not exceed 3 mils.
Clean-up:
Use #500 Gem Coat Lacquer Thinner or SOL-9011 HAPs Free Lacquer Thinner to clean all equipment. Dispose of in accordance with Federal, State, and Local regulation regarding pollution.