Gem Seal® Precatalyzed Vinyl Sealer

Six Month Shelf Life @ 77°  F

hiperfcans (med).jpgGem Seal® Precatalyzed Vinyl Sealer is a “better” quality vinyl sealer designed to prepare the substrate for a High Performance topcoat system. Gem Seal Vinyl Sealer offers additional moisture and chemical resistance when used under virtually any Gemini High Performance topcoat. This product meets all of the pertinent government regulations regarding emissions and exceeds the performance parameters outlined by KCMA and ASTM.


Product Codes

210-0001  Gem Seal® Precatalyzed Vinyl Sealer 

MSDS      PDS 

*Available in Fives and 55 Gallon Drums

Product Preparation & Application


Material Preparation:   Gemini High Performance Sealers are ready to use as packaged. Mix or agitate thoroughly before use. Reduction may be required for certain types of application. SOL-9011 HAPs Free Thinner should be used for reduction. If slower dry time is required, only use SOL-9012 HAPs Free Retarder.

Application:   Apply with conventional, air assisted airless, HVLP or airless equipment. For airless equipment, pressure may need to be increased due to high solids content. We recommend a coating system comprised of one coat of sealer at 3-4 mils wet film build and 1-2 coats of topcoat at 3-4 mils wet film build. Total dry film build for the complete coating system should not exceed 4 mils.

Clean-up:   Use #500 Gem Coat Lacquer Thinner or SOL-9011 HAPs Free Lacquer Thinner to clean all equipment. Dispose of in accordance with Federal, State, and Local regulation regarding pollution. 

Product Advantages

  • HAPs Compliant 
  • AIM Compliant 
  • Water Clear
  • User Friendly
  • Excellent Moisture Resistance 
  • No Catalyst Required
  • Self-Sealing
  • Non-Yellowing*
  • No Critical Recoat Time
  • Dries "Smoother" Than Other Sealers Requiring Less Scuff Sanding
  • Passes KCMA Performance Requirements 
  • Passes ASTM Performance Requirements

* Clear non-yellowing coatings are formulated with resin systems and U.V. inhibitors designed to resist yellowing.  The coating will not protect wood, lightly stained wood substrates or pigmented basecoats from yellowing.  

 

 

<< Back to 'Clear Sealers'