Gem Coat® Vinyl Sealer

gemcoat.combo (large).jpgGem Coat® Vinyl Sealer is a “good” quality vinyl sealer designed to prepare the substrate for a High Performance topcoat system. Use under standard nitrocellulose or precatalyzed lacquers for a faster dry time to scuff sand and recoat, in addition to achieving better performance than a nitrocellulose sealer.

 


  






Product Codes

210-0010  Gem Coat® Vinyl Sealer 

MSDS      PDS 

*Available in Gallons (4 per case), Fives and 55 Gallon Drums

Product Preparation & Application


Material Preparation:   Gemini High Performance Sealers are ready to use as packaged. Mix or agitate thoroughly before use. Reduction may be required for certain types of application. SOL-9011 HAPs Free Thinner should be used for reduction. If slower dry time is required, only use SOL-9012 HAPs Free Retarder.

Application:   Gem Coat Vinyl Sealer is designed for spray application. Temperature will affect viscosity. We recommend a coating system comprised of one coat of Gem Coat Vinyl Sealer at 3-4 mils wet film build and 1-2 coats of Topcoat at 3-4 mils wet film build. Total dry film build for the complete coating system should not exceed 3 mils.

Clean-up:   Use #500 Gem Coat Lacquer Thinner or SOL-9011 HAPs Free Lacquer Thinner to clean all equipment. Dispose of in accordance with Federal, State, and Local regulation regarding pollution.

Product Advantages

  • HAPs Compliant 
  • AIM Compliant 
  • Water Clear 
  • Non-Yellowing* 
  • No Critical Recoat Time 

* Clear non-yellowing coatings are formulated with resin systems and U.V. inhibitors designed to resist yellowing.  The coating will not protect wood, lightly stained wood substrates or pigmented basecoats from yellowing.  

 

 

<< Back to 'Clear Sealers'