275 VOC High Build Lacquer, Clear


gemcoat.combo (large).jpgThis system is designed for use in geographical areas where 275 VOC products are required by government regulations.  High Build Lacquers are a high solids, AIM compliant coating formulated to meet or exceed federal VOC regulations.  This system is a highly efficient, nitrocellulose lacquer utilizing premium quality imported modifying resins which promote excellent holdout, gloss retention and film hardness.  This system is intended for use on interior architectural or decorative woodwork and should not be utilized as a system for furniture, cabinetry, or where chemical and water resistance are required.  Not intended for use over light or natural stains where clarity and non-yellowing are critical.  For non-yellowing systems see Water Clear Lacquers.



Product Codes

200-0227  275 VOC High Build Lacquer Sealer, Clear
500-0280  275 VOC High Build Lacquer, Gloss, Clear
500-0281  275 VOC High Build Lacquer, Semi-Gloss, Clear
500-0282  275 VOC High Build Lacquer, Satin, Clear
500-0283  275 VOC High Build Lacquer, Flat, Clear

MSDS      PDS
MSDS      PDS
MSDS      PDS
MSDS      PDS
 MSDS      PDS

*Available in Gallons (4 per case), Fives and 55 Gallon Drums

Product Preparation & Application


Material Preparation:   Ready to use as packaged. Mix or agitate thoroughly before use. Reduction may be required for certain types of application. Acetone or Zero VOC Lacquer Thinner should be used for reduction.

Application:   Because of the short dry time, this series of finishes must be applied with professional spray equipment. A minimum of two coats over a lacquer sealer is recommended for most jobs. The temperature of the product will affect viscosity. All products are formulated to achieve the highest possible solids content that will allow proper spray atomization without the addition of costly chemical solvents. We do not recommend that the sealer be sprayed hot; however, all finish coat products can be sprayed hot with excellent results. Total dry film build of for the complete coating system should not exceed 4 mils..

Clean-up:   Use Acetone or Zero VOC Lacquer Thinner to clean all equipment. Dispose of in accordance with Federal, State, and Local regulation regarding pollution.

Product Advantages

  • High Solids
  • AIM Compliant 
  • 275 VOC Compliant
  • Easy to Apply
  • No Catalyst Required
  • Ready to Spray for Airless Application
  • Quick Dry
  • Excellent Film Build and High Profile Appearance

 

 

<< Back to 'High Build Economy Lacquer'