Application and Helpful Hints

 

TWP® Stain Application


Deckclean (small).jpg

  • Mix/shake product thoroughly
  • Wood should be clean, dry, free of any previous coating and applied above 50 degrees F
  • Prepare and cover all surrounding areas to prevent all overspray
  • Apply flood coat using TWP® Deck Sprayer, brush or roller
  • If needed, apply second coat wet on wet
  • DO NOT allow TWP® to puddle
  • Excessive stain that does not penetrate, may cause failure

TWP® Helpful Hints 
 6359Deck (small).jpg

  • Overnight dry time depending upon temperature and humidity
  • Do NOT thin TWP®
  • Mineral Spirits clean up     
  • Do not apply below 50 degrees F. 
  • Coverage rate is 200-400 sq. ft. per gallon
  • Always cover and protect surrounding areas that are not being coated with TWP®
  • Keep TWP® off glass, vegetation, concrete and any other surface

 

<< Back to 'FAQ's'